Product Overview
USB 3.0 Micro-B is the wide, two-part socket on the back of nearly every portable external hard drive, and the cable that comes with the drive is usually the first thing to get lost or frayed. This is a plain replacement: a standard USB Type-A plug for the computer and the matching USB 3.0 Micro-B plug for the drive, with nothing in between but the wire.
At about 30 cm it is deliberately short. A portable drive sits beside the laptop, so a one-metre cable just coils up on the desk; this length keeps the run tidy and travels flat in a laptop bag. The cable carries data and the bus power the drive runs on, so no separate power supply is involved. It also fits the Samsung Galaxy Note 3 and Galaxy S5, which used the same connector, and the Micro-B end will plug into a USB 3.0 external drive connected to a games console or TV box that has USB 3.0 ports.
Before ordering: the Micro-B plug here is the wide USB 3.0 type, which is physically different from the small Micro-USB 2.0 plug used by older phones - it will not fit a Micro-USB 2.0 socket. Check the shape of the socket on your drive before ordering. The cable works in a USB 2.0 port as well, but the drive will then run at USB 2.0 speed, and some drives need the full current of a USB 3.0 port to spin up.
Technical Specifications
| Type | USB 3.0 data and power cable |
| Connector A | USB 3.0 Type-A male |
| Connector B | USB 3.0 Micro-B male |
| Length | 1 ft, about 30 cm |
| Carries | Data and bus power |
| Backward compatibility | Works in USB 2.0 ports at USB 2.0 speed |
| Typical devices | Seagate, WD and Toshiba portable hard drives; Galaxy Note 3 and S5 |
| Colour | Blue |