Product Overview
A plain USB cable stops being reliable somewhere around five metres. This kit gets past that by converting the USB signal into a form that travels down ordinary twisted-pair network cable and converting it back at the far end. The sender unit plugs into a USB port on the computer, the receiver unit sits next to the device, and a length of Cat5e or Cat6 cable joins the two - the same cable you would buy for networking, cut to whatever length the run needs.
That makes it useful wherever the computer and the peripheral cannot sit together: a barcode scanner at a counter with the PC in the back office, a printer at the other end of a workshop, or a keyboard and mouse at a lectern with the machine in a rack. Neither unit needs a power supply and neither needs a driver; both draw what they need from the USB port and start working as soon as they are plugged in.
Before ordering: this is a Full-Speed USB link, which means it carries devices that run at 12 Mb/s or 1.5 Mb/s - keyboards, mice, printers, scanners, barcode readers, KVM switches. It is not suitable for High-Speed devices such as USB flash drives, external hard disks or 1080p webcams; the manufacturer states that only 720p webcams work. Full USB 2.0 throughput is only reached on short runs of around 50 m, and the speed drops as the run gets longer. The network cable is not included, and the two units must be joined directly to each other - do not pass the link through a network switch or router.
Technical Specifications
| Type | USB extender over twisted-pair cable, 2-piece set |
| Sender (TX) | USB Type-A male, RJ45 female |
| Receiver (RX) | USB Type-A female, RJ45 female |
| Maximum distance | Up to 200 m (656 ft) over Cat5e / Cat6 |
| Supported USB speeds | Low Speed 1.5 Mb/s and Full Speed 12 Mb/s |
| Full USB 2.0 rate | Short runs only, around 50 m |
| Webcam support | 720p only, 1080p not supported |
| Power | None required, bus powered |
| Drivers | Not required, plug and play |
| Unit size | 60 x 21 x 18 mm each |
| Colour | White |
| In the box | 1 x sender (TX), 1 x receiver (RX). Network cable not included |