Product Overview
If you only keep one precision driver in the drawer, a 1.5 mm Phillips is the one that gets used. It fits the screws holding a laptop bottom cover, the brackets around a 2.5-inch drive, the shells of games controllers and routers, and most of the larger internal fasteners in a phone or tablet. This is the single-driver JM-8119 from JAKEMY, so there is no bit to work loose in a holder while you are turning.
The shaft is hardened steel and magnetised, which keeps the screw on the tip while you line it up in a recess you can barely see. The handle is a two-material moulding - hard plastic for the body, soft rubber for the grip - with a cap at the end that spins freely, so one finger holds steady downward pressure while the hand turns the handle. Overall length is 175 mm.
Before ordering: check the screw size first. 1.5 mm is the general-purpose cross size; the small screws inside a phone are usually 1.2 mm, and Apple bottom-case screws are pentalobe, not Phillips, and need a 0.8 mm pentalobe driver instead. Those are separate drivers in the same JM-8119 range.
Technical Specifications
| Brand | JAKEMY |
| Model | JM-8119 |
| Tip type | Phillips (cross head) |
| Tip size | 1.5 mm |
| Overall length | 175 mm |
| Shaft | Hardened steel, magnetised |
| Handle | Two-material anti-slip grip with rotating end cap |
| Typical use | Laptops, phones, tablets, consoles, small electronics |
| Colour | Black and orange |