Product Overview
Test leads are the part of a multimeter that wears out first. The insulation cracks where the cable leaves the probe, a conductor breaks inside and readings start jumping, or a tip gets bent out of shape. This is TOTAL's replacement pair, model TMT31001: two one-metre leads, each with a 150 mm probe pen at one end and a right-angle shrouded banana plug at the other, one red and one black.
They are rated CAT III 1000 V, which is the category for fixed installation work - distribution boards, feeders, short branch circuits and three-phase equipment. The probe bodies are finger-guarded and the plugs are the standard 4 mm shrouded type that fits almost any modern meter, not only TOTAL's. TOTAL lists them for its own DM310002, DM310004, DM410003 and DM110004 multimeters and for the DCM610001 and DCM610002 clamp meters. They arrive on a double blister card.
Before ordering: check that your meter takes 4 mm shrouded banana plugs - most modern multimeters and clamp meters do, but some older or budget meters use unshrouded 4 mm or a fixed captive lead. Also match the category to the work: a CAT III 1000 V lead is for distribution-level circuits, and leads should never be used above the rating marked on them or on the meter. Replace any lead whose insulation is cracked or whose tip is loose rather than taping it up.
Technical Specifications
| Brand | TOTAL |
| Model | TMT31001 |
| Safety rating | CAT III 1000 V |
| Lead length | 100 cm |
| Probe pen length | 150 mm |
| Meter-end connector | Right-angle 4 mm shrouded banana plug |
| Quantity | One pair - red and black |
| Listed for | TOTAL DM310002, DM310004, DM410003, DM110004, DCM610001, DCM610002 |
| Packaging | Double blister card |