Skip to Content

ALUMINIUM Foil Tape Silver Tape 1″ Inch 30mm Aluminum Foil Tape Aluminum Tape Heat Resistant Silver Duct Tape High Temperature Aluminum Foil Tape Adhesive Tape

Silver aluminium foil tape, 30 mm (1") wide, with a heat-resistant pressure-sensitive adhesive protected by a peel-off paper liner. Made for sealing and patching HVAC ducts, insulation seams, vent pipes and heat-reflective surfaces.

  • 30 mm (1 inch) tape width
  • Solid aluminium foil backing – not a woven, mesh or butyl tape
  • Heat-resistant adhesive, suitable for warm ducts, vents and flues
  • Reflects radiant heat and blocks moisture, dust and air leaks
  • Conformable foil moulds around joints, corners and round pipes
  • Silver metallic finish on a paper release liner
Price
120.00 LE 120.00 LE

Product Overview

This aluminium foil tape is a single-sided silver foil tape, 30 mm (1 inch) wide, coated with a heat-resistant pressure-sensitive adhesive and supplied on a paper release liner. The solid aluminium backing gives it the properties ordinary cloth or plastic duct tape does not have: it reflects radiant heat, forms a vapour and moisture barrier, and does not dry out or shrink away from warm surfaces the way a rubber-backed tape can.

It is the standard tape for sealing joints and seams on HVAC ducting, flexible ducts, dryer and extractor vent pipes, water-heater flues, foil-faced insulation boards and reflective insulation blankets. It also works for heat shielding, light foil repairs and any job where a thin, conformable metal tape is needed. The foil moulds around corners and round pipes and can be cut with scissors or a knife for a clean edge.

How to apply: clean and dry the surface first – dust, oil and condensation are the usual reasons foil tape lifts. Peel the paper liner, lay the tape down without stretching it, then press it firmly along its whole length so the adhesive wets out the surface. Overlap the previous strip by at least 25 mm on duct seams.

Technical Specifications

Product typeSingle-sided aluminium foil adhesive tape
Backing materialAluminium foil (solid, non-reinforced)
Tape width30 mm (1 inch nominal)
AdhesiveHeat-resistant pressure-sensitive adhesive
LinerPeel-off paper release liner
Colour / finishSilver, metallic
Key propertiesHeat resistant, heat reflective, moisture and vapour barrier, conformable
Typical usesHVAC and flexible duct seams, dryer and extractor vents, water-heater and flue pipes, foil-faced and reflective insulation, heat shielding, foil repairs