Product Overview
Most people have a 2.5-inch drive sitting in a drawer after a laptop upgrade. This enclosure is what turns it into something useful: a portable drive for backups, film libraries, project files or a bootable rescue disk. The case opens without a screwdriver, the drive pushes onto the SATA connector inside, and the lid clips shut.
It runs over USB 3.0 at up to 5 Gbps and supports the UASP and TRIM protocols, which matters if you put an SSD in it — UASP lifts real transfer rates well above plain USB mass storage, and TRIM lets the SSD keep itself tidy. HIKSEMI quotes 1 GB in about three seconds. The enclosure drops into a sleep state after ten minutes of inactivity to spare a spinning disk the wear, and wakes the moment you touch the files again. It draws all its power from the USB port, so there is no adapter to carry, and Windows, macOS, Linux and Android all mount it without a driver.
Before ordering: the enclosure is supplied empty — no hard disk or SSD is included. It takes a 2.5-inch SATA drive up to 9.5 mm thick; it will not take a 3.5-inch desktop drive, an M.2 / NVMe SSD, or a drive with a proprietary connector pulled from an external USB case. The cable is Micro-B to USB-A, so a USB-C-only laptop needs an adapter. A brand-new drive has to be partitioned and formatted before it shows up.
Technical Specifications
| Brand | HIKSEMI |
| Model | MHB201 (HS-HUB-MHB201) |
| Type | 2.5″ SATA III HDD / SSD enclosure |
| Output interface | USB 3.0 |
| Transfer rate | Up to 5 Gbps |
| Protocols | UASP and TRIM supported |
| Power saving | Auto sleep after 10 minutes idle, instant wake |
| Connector on case | Micro-B |
| Supported drives | 2.5″ SATA HDD / SSD, up to 9.5 mm thick |
| Operating systems | Windows, macOS, Linux, Android |
| Material | ABS |
| Dimensions | 126 × 81 × 14 mm |
| Colour | Black |
| In the box | Enclosure, Micro-B to USB-A cable |
| Barcode | 6974202729332 |