Skip to Content

Maruson Micro MIC-850A 850VA Line Interactive UPS with AVR - 480W Battery Backup & Surge Protection, 220/230/240V, Simulated Sine Wave

The Maruson Micro MIC-850A is a 850VA / 480W line interactive UPS that keeps a PC, router, POS terminal or small NVR running through a power cut and steadies the voltage the rest of the time. Built-in AVR corrects brownouts and over-voltage without draining the battery.

  • Model MIC-850A — 850VA / 480W line interactive UPS
  • Automatic voltage regulation: 2 steps up and 1 step down
  • Input range 154 ~ 280 VAC; output 220 / 230 / 240 VAC ±10%
  • Simulated sine wave on battery, typical transfer time 2 ~ 6 ms
  • Sealed maintenance-free lead-acid battery 12V 7.2Ah x1, recharges to 90% in under 5 hours
  • 175 J surge protection with EMI filtering; overload, discharge and overcharge protection
Price
3,500.00 LE 3,500.00 LE

Product Overview

The Maruson Micro MIC-850A is a compact 850VA / 480W uninterruptible power supply for a desktop PC, a router and modem, a point-of-sale terminal, a small surveillance recorder or any single workstation that should not go down with the mains. When utility power fails it switches to its internal battery in about 2 to 6 milliseconds, which is fast enough that connected equipment keeps running, giving you time to save work and shut down cleanly.

Most of the time the battery is not what protects the load. The Micro series is line interactive, so an automatic voltage regulator trims the incoming supply with two boost steps and one buck step and holds the output at 220 / 230 / 240 VAC while the input wanders anywhere between 154 and 280 VAC. Brownouts and over-voltage are corrected without touching the battery, which both protects the equipment and makes the battery last longer. A 175 joule surge path with EMI filtering handles spikes and line noise, and overload, deep-discharge and overcharge protection look after the unit itself.

On battery the output is a simulated sine wave, which suits PCs, networking gear and general electronics. Equipment that specifically requires a pure sine wave input, such as some active PFC power supplies and medical devices, should use a pure sine wave model instead.

Technical Specifications

ModelMIC-850A
Capacity850VA / 480W
TopologyLine interactive with AVR
Nominal Voltage220 / 230 / 240 VAC
Input Voltage Range154 ~ 280 VAC
Frequency50 / 60 Hz (auto sensing)
Output Voltage220 / 230 / 240 VAC ±10%
Voltage Regulation2 steps up and 1 step down
Waveform (Battery Mode)Simulated sine wave
Transfer Time2 ~ 6 ms (typical)
BatterySealed maintenance-free lead-acid, 12V 7.2Ah x1
Recharge TimeUnder 5 hours to 90% capacity
Surge Protection175 J, with EMI filtering
ProtectionOverload, discharge and overcharge protection
Net Weight5.2 kg (11.5 lb)
Dimensions (D x W x H)343 x 135 x 208 mm (13.5 x 5.3 x 8.2 in)