Skip to Content

Creative ATX-1800W High Output Power Supply for Professional Desktop & Server Builds

A low-cost ATX power supply for basic office and home desktop builds and for replacing a failed unit in an older tower. It uses a quiet 120 mm fan and carries the standard ATX cable set.

  • Brand as printed on the box: CREETIVE
  • Model designation on the box: ATX-1800W (see the note below — this is a model name, not a tested output)
  • Standard ATX form factor, ATX 12V version 2.3
  • 120 mm cooling fan
  • Unit weight approximately 1.03 kg
  • Made in China
Price
450.00 LE 450.00 LE

Product Overview

This is an entry-level ATX power supply aimed at the simplest jobs: getting a basic office or home desktop running again after its original supply has failed, or finishing a low-cost build that uses integrated graphics. It is a standard ATX unit, so it bolts into any normal tower case, and it is supplied with the usual motherboard, CPU, SATA and Molex leads already attached.

Cooling is handled by a 120 mm fan, which runs more quietly than the small 80 mm fans used in the cheapest supplies. The rear panel carries a standard IEC kettle-type mains inlet, and the unit is built to the ATX 12V version 2.3 specification as printed on the retail box.

Before ordering — please read this carefully:

The number in the model name is not a tested power rating. "ATX-1800W" is the model designation the factory prints on the box. It is not a verified continuous output figure, and this unit should not be planned around as an 1800-watt supply. The unit weighs about 1.03 kg; genuine power supplies that deliver well over a kilowatt use far larger transformers, heatsinks and capacitors and typically weigh three to five times as much. Treat this as a basic entry-level supply.

What it is suitable for: an office or home desktop running a processor with integrated graphics, one or two drives, and ordinary everyday workloads.

What it is not suitable for: a dedicated gaming graphics card, a high-core-count or overclocked processor, a crypto-mining rig, a NAS, or any server or always-on machine carrying data you care about. For those builds, choose a power supply from a manufacturer that publishes a real tested rating and a per-rail specification.

If you need a supply for a demanding or critical system, please contact us and we will recommend a suitable unit instead.

Technical Specifications

Brand (as printed on the box)CREETIVE
Model designationATX-1800W
Verified continuous outputNot published by the manufacturer — see the note above
Form factorATX, ATX 12V version 2.3
Cooling fan120 mm
Mains inletIEC C14 (standard kettle lead)
CablesFixed, non-modular: motherboard, CPU, SATA and Molex leads
Unit weightApprox. 1.03 kg
Country of manufactureChina
ColourBlack