Skip to Content

EDAC Power EA11013D-120 EA11011D-120 AC Adapter 12V 8.33A 100W Charger

The EDAC EA11013D-120 is a 100W desktop power adapter that delivers a steady 12V DC at up to 8.33A. It suits LCD monitors, LED lighting, NAS and external drive enclosures, POS terminals, CCTV recorders and other equipment that runs on a 12V supply.

  • Model: EDACPOWER ELEC. EA11013D-120, from the same 12V 8.33A family as the EA11011D-120
  • DC output: 12V, 8.33A, 100W maximum
  • AC input: 100-240V, 2.0A, 50-60Hz, so it works on Egyptian mains
  • Round barrel DC plug with a centre pin
  • Detachable AC power cord, indoor I.T.E. use only
  • Black desktop brick made by EDAC Power Electronics
Price
250.00 LE 250.00 LE

Product Overview

The EDAC EA11013D-120 is a 100W switching power adapter that converts ordinary mains electricity into a regulated 12V direct current supply, rated for a continuous 8.33A. It is the original EDACPOWER ELEC. part, not a generic replacement, and carries the rating label and safety approval marks shown in the photos.

Because it accepts anything from 100V to 240V at 50 or 60Hz, it runs on Egyptian mains without a converter. A detachable power cord plugs into the back of the unit, so a damaged cord can be swapped without replacing the adapter. Typical uses are LCD and LED monitors, LED strip lighting, NAS and external hard drive enclosures, POS and label printers, CCTV recorders, network switches and audio equipment that asks for 12V at up to 8.33A.

Before ordering: confirm that your device needs 12V DC and draws no more than 8.33A, and compare the DC plug with the one on your current adapter. EDAC builds this 12V 8.33A family with more than one output connector: the unit pictured here has a round barrel plug, while some EA11011D-120 units are supplied with a 4-pin connector used by certain NAS enclosures. If you are not sure, measure the plug on your old adapter or send us a photo first.

Technical Specifications

BrandEDAC / EDACPOWER ELEC.
ModelEA11013D-120
SeriesEA11013D-120 / EA11011D-120 (12V 8.33A, 100W)
Output voltage12V DC
Output current8.33A
Output power100W maximum
Input voltage100-240V AC
Input current2.0A
Mains frequency50-60Hz
DC connectorRound barrel plug with centre pin
AC cordDetachable, not fixed to the adapter
Efficiency levelVI
Safety approvalsUL, TUV, CE, FCC, CCC, KC, EAC, RCM, RoHS
UseIndoor use only, I.T.E. equipment
ColourBlack
Form factorDesktop brick
ManufacturerEDAC Power Electronics (Suzhou) Co., Ltd.