Product Overview
Plenty of equipment runs on 9V DC rather than 5V or 12V: ADSL and fibre routers, some scanners and label printers, guitar effect pedals, small audio mixers, 9V LED strips and a long list of hobby boards. This adapter covers that need with a single mains-to-9V block that plugs directly into the socket, so there is no brick on the floor and no extra mains lead to find.
It is a switching supply, which means it regulates the output electronically instead of using a heavy transformer. The result is a unit that stays light and cool, holds 9V steady as the load changes, and accepts anything from 100V to 240V at 50 or 60Hz. The two round pins are the standard European pattern used in Egypt, and the output cable is fixed to the body and terminated in a DC barrel plug.
Before ordering: check three things against your device. First the voltage must be exactly 9V - a 12V supply will damage a 9V device. Second, your device must draw 2A or less; a device that needs more than 2A will not run reliably. Third, and most often missed, the DC barrel plug comes in more than one size and polarity, so compare the plug on this adapter with your old one before buying. If you are not sure, bring the device or its original adapter to the shop and we will match it for you.
Technical Specifications
| Type | Switching AC/DC wall adapter |
| Input | 100-240V AC, 50/60Hz |
| Output | 9V DC, up to 2A |
| Maximum power | 18W |
| Mains plug | EU two round pins (standard Egyptian socket) |
| Output connector | DC barrel plug on a captive cable, single output |
| Housing | Moulded plastic, black |
| Typical uses | Routers, LED strips, scanners, audio pedals, DIY and hobby boards |