Product Overview
The YLT-42-2000 is a 42V 2A (84W) smart charger for 36V lithium-ion battery packs, the type used in hoverboards, self-balancing boards and many electric scooters. A 36V (10S) Li-ion pack is fully charged at 42V, which is why the charger carries a 42V rating rather than 36V. The output cable ends in the large 3-pin round connector that most hoverboards and some e-scooters use.
The housing is a black ABS brick with a universal 100-240V AC input, so it runs on Egyptian mains without a converter, and a figure-8 (IEC C7/C8) mains socket on the back for the power lead. A single LED on the body shows charging status: it glows red while the pack is charging and switches to green once the pack is full or the charger is unplugged from the device. The unit is Class II double insulated and carries CE, FCC and RoHS markings.
Before ordering: check the label on your original charger and confirm it reads 42V and 2A (or lower), and check that your device uses the large 3-pin round charging port shown in the photos. Devices with a round barrel (DC jack) port, or packs rated at a different voltage, need a different charger.
Technical Specifications
| Model | YLT-42-2000 |
| Input | 100-240V AC, 50/60Hz, 0.5A |
| Output | 42V DC, 2000mA (2A) |
| Output power | 84W |
| Output connector | Large 3-pin round plug, centre-positive |
| Mains inlet | Figure-8 (IEC C8) socket |
| Battery type | 36V (10S) lithium-ion, 42V full charge |
| Status LED | Red: charging / Green: full or disconnected |
| Compatible devices | Hoverboards, self-balancing boards and e-scooters with a 3-pin port |
| Insulation class | Class II (double insulated) |
| Certifications | CE, FCC, RoHS |
| Colour | Black |