Skip to Content

Dell DA130PE1-00 AC Adapter Charger P/N JU012 19.5V DC 6.7A Tested

The Dell DA130PE1-00 is a 130 W laptop power adapter that delivers 19.5 V at 6.7 A through the large 7.4 × 5.0 mm barrel tip with a centre pin — the connector Dell used across its Inspiron, Latitude, Precision, Studio and Vostro ranges.

  • Model: DA130PE1-00, Dell part number JU012
  • Output: 19.5 V, 6.7 A (130 W)
  • Input: 100-240 V, 2.5 A, 50-60 Hz
  • Connector: 7.4 × 5.0 mm barrel with centre pin
  • Built for Dell by Delta Electronics
  • Supplied tested and working
Price
400.00 LE 400.00 LE

Product Overview

This is Dell's 130 W class adapter, the one that shipped with the machines that needed more headroom than the common 65 W and 90 W bricks: mobile workstations, the larger Inspiron and Vostro models, and XPS 15 and 17 laptops with discrete graphics. It carries the model code DA130PE1-00 on its label, Dell part number JU012, and it is built for Dell by Delta Electronics.

Output is 19.5 V at 6.7 A, delivered over the large 7.4 × 5.0 mm barrel connector with a centre pin. That centre pin carries Dell's identification signal, so the laptop can read the adapter's wattage at boot instead of warning about an unknown power source. The input stage accepts 100-240 V at 50-60 Hz, so it runs on Egyptian mains without a converter.

Before ordering: check the socket on your laptop. This adapter has the large 7.4 × 5.0 mm tip, not the slim 4.5 × 3.0 mm tip used on newer XPS and Inspiron models — the two are not interchangeable without a converter. Confirm your laptop asks for 19.5 V, and note that a machine rated for 130 W will not charge properly from a lower-wattage adapter.

Technical Specifications

BrandDell
ModelDA130PE1-00
Dell part numberJU012 (DP/N 0JU012)
ManufacturerDelta Electronics
Output19.5 V, 6.7 A (130 W)
Input100-240 V, 2.5 A, 50-60 Hz
Connector7.4 × 5.0 mm barrel with centre pin
Typical useDell Inspiron, Latitude, Precision, Studio, Vostro, XPS 15 (L502x), XPS 17 (L702x)
ConditionTested and working