Product Overview
This is the kind of power supply most office and home desktops actually run on: a plain ATX unit, standard size, with the connector set a normal build needs and nothing it does not. It suits a basic office machine, a family PC, or an older tower whose original supply has failed. The casing is the usual 140 × 150 × 85 mm ATX footprint, so it drops straight into any standard case without modification.
Cooling comes from a 120 mm fan with automatic speed control, so the unit stays quiet at low load and only spins up when it needs to — noticeably calmer than the small 80 mm fans fitted to cheaper supplies. Inside there is an EMI filter plus over-voltage and over-current protection circuitry, and the unit holds Korean KC safety certification (EMC registration MSIP-REM-3YE-500AK). The cable set covers a 20+4 pin motherboard connector, a 4+4 pin CPU connector, one PCI-E 6 pin, three SATA and three Molex 4 pin leads.
Before ordering — please read:
1. The real output is 230 W. The model name contains "600", but that is not the wattage. The manufacturer's own specification sheet lists the rated (continuous) output as 230 W. Plan your build around 230 W, not 600 W. It is sufficient for a CPU with integrated graphics, a couple of drives and normal office or home use. It is not suitable for a dedicated gaming graphics card, a high-core-count processor, or any system drawing more than about 200 W in total.
2. Bulk packaging. The unit is supplied on its own — no retail box, no printed manual, and no AC mains cable. If you do not already have a kettle-type (IEC C13) power lead, order one separately.
3. Mains input. The unit's label states 220 V, 60 Hz, 4 A, as it was built for the Korean market. Egyptian mains is 220 V at 50 Hz. Please confirm the frequency rating on the unit you receive before installing it.
Technical Specifications
| Brand | AONE |
| Model | Taewang EP600L KC |
| Form factor | ATX |
| Rated output | 230 W continuous |
| Dimensions | 140 × 150 × 85 mm (W × D × H) |
| Cooling fan | 120 mm, automatic speed control |
| Mains input (per label) | 220 V~, 60 Hz, 4 A |
| Motherboard connector | 20+4 pin × 1 |
| CPU connector | 4+4 pin × 1 |
| PCI-E connector | 6 pin × 1 |
| SATA connectors | × 3 |
| Molex / IDE 4 pin | × 3 |
| Protection | EMI filter, over-voltage, over-current |
| Certification | Korean KC — EMC reg. MSIP-REM-3YE-500AK |
| Country of manufacture | China |
| Packaging | Bulk — unit only, no box, no mains cable |
| Colour | Black |