Skip to Content

Portal 24-Hour Mechanical Program Timer | Energy Saving Outlet Switch for Home Appliances

The Portal 24-hour mechanical timer is a plug-in time switch that turns any appliance on and off automatically on a repeating daily cycle. You set the times by pushing the small pins on the dial in or out, then plug the appliance into the socket on the front - no app, no batteries and no programming menus.

  • Repeating 24-hour daily cycle, set directly on the numbered dial
  • Pass-through earthed Schuko (type F) socket on the front, fits Egyptian plugs
  • Side slider switch for manual ON or automatic TIMER operation
  • Indicator lamp shows when the outlet is live
  • Fully mechanical - nothing to recharge and no settings lost on reset
  • Colour: white
Price
225.00 LE 225.00 LE

Product Overview

This is the simplest kind of time switch there is. The unit plugs into a wall socket and your appliance plugs into the socket on its face. The large rotating dial is numbered from 1 to 24 and carries a ring of small push-in pins; pressing the pins down over a stretch of the dial tells the timer to switch the outlet on during those hours, and the pattern repeats every day for as long as the unit stays plugged in.

Because the mechanism is mechanical rather than electronic, there is nothing to configure, no clock to re-enter after a power cut beyond turning the dial back to the current time, and no battery to replace. A slider on the side lets you bypass the programme and leave the outlet permanently on when you need it, and a small indicator lamp shows at a glance whether the socket is currently switched on. Typical uses are aquarium and plant lights, water heaters and pumps, phone and battery chargers, heaters, fans, and lamps set to come on in the evening while the house is empty.

Before ordering: this is a mechanical timer, so the smallest block of time you can set is the width of one pin on the dial, and the timer keeps time from the mains supply - it will drift if the power is cut. Check that your appliance draws less current than the rating printed on the back of the unit before plugging it in, and never use a timer of this type with medical or life-support equipment.

Technical Specifications

TypePlug-in mechanical (analogue) daily time switch
Cycle24 hours, repeating
Setting methodPush-in pins on a numbered 1-24 dial
OutletEarthed Schuko (CEE 7/3, type F) pass-through socket
Manual overrideSide slider: continuous ON or automatic TIMER
IndicatorPower-on lamp
Power sourceMains-driven synchronous motor, no battery
ColourWhite