Skip to Content

PCIe to Dual USB-C Expansion Card – PCI Express x1 to 2-Port USB 3.2 Gen 2 10Gbps Type-C Host Controller with SATA Power

This PCI Express x1 card adds two USB-C ports to a desktop PC at USB 3.2 Gen 2 speed, 10 Gbps per port. It is the straightforward way to get modern Type-C connectors on a tower whose motherboard only has USB-A, for an NVMe enclosure, a fast external SSD, a capture card or a phone.

  • 2 × reversible USB-C ports on the rear bracket
  • USB 3.2 Gen 2 — up to 10 Gbps per port
  • PCI Express x1 edge connector — fits x1, x4, x8 and x16 slots
  • 15-pin SATA power input for full bus power to both ports
  • Backward compatible with USB 3.0, 2.0 and 1.1 devices
  • For desktop PCs only — not for laptops
Price
600.00 LE 600.00 LE

Product Overview

Most desktop motherboards still put USB-A on the back panel and, at best, one Type-C header inside the case. This card fills that gap: it drops into any free PCI Express slot and brings out two reversible USB-C ports on the bracket, each running at USB 3.2 Gen 2 speed — 10 Gbps, twice the 5 Gbps of a USB 3.0 port.

That is enough headroom for the devices that actually need it: an NVMe SSD enclosure, a portable SSD, a 4K capture card, a fast card reader or a docking adapter. A 15-pin SATA power connector on the board takes power straight from the PSU rather than from the slot, so both ports can deliver full current at the same time without the card browning out. The edge connector is x1, so it works in an x1 slot and equally in a spare x4, x8 or x16 slot.

Before ordering: this is a desktop card — it will not work in a laptop. Check you have a free PCI Express slot and a spare 15-pin SATA power lead from the power supply; the card needs it. You get USB-C ports, not Thunderbolt and not USB Power Delivery charging for a laptop, and 10 Gbps is the port speed — the real transfer rate depends on the drive you plug in. The listing does not state the controller chipset or the brand, so if you need a specific chipset for a driver or for macOS, ask us before ordering.

Technical Specifications

TypePCI Express expansion card, USB host controller
Host interfacePCI Express x1 (works in x1 / x4 / x8 / x16 slots)
Ports2 × USB-C (Type-C, reversible)
USB standardUSB 3.2 Gen 2
SpeedUp to 10 Gbps per port
Extra power15-pin SATA power connector (required)
Backward compatibilityUSB 3.0 / 2.0 / 1.1 devices
PlatformDesktop PC only
Board colourGreen PCB, steel bracket