Product Overview
The Maruson Micro MIC-650A is a compact 650VA / 360W uninterruptible power supply for a desktop PC, a router and modem, a point-of-sale terminal, a small surveillance recorder or any single workstation that should not go down with the mains. When utility power fails it switches to its internal battery in about 2 to 6 milliseconds, which is fast enough that connected equipment keeps running, giving you time to save work and shut down cleanly.
Most of the time the battery is not what protects the load. The Micro series is line interactive, so an automatic voltage regulator trims the incoming supply with two boost steps and one buck step and holds the output at 220 / 230 / 240 VAC while the input wanders anywhere between 154 and 280 VAC. Brownouts and over-voltage are corrected without touching the battery, which both protects the equipment and makes the battery last longer. A 175 joule surge path with EMI filtering handles spikes and line noise, and overload, deep-discharge and overcharge protection look after the unit itself.
On battery the output is a simulated sine wave, which suits PCs, networking gear and general electronics. Equipment that specifically requires a pure sine wave input, such as some active PFC power supplies and medical devices, should use a pure sine wave model instead.
Technical Specifications
| Model | MIC-650A |
| Capacity | 650VA / 360W |
| Topology | Line interactive with AVR |
| Nominal Voltage | 220 / 230 / 240 VAC |
| Input Voltage Range | 154 ~ 280 VAC |
| Frequency | 50 / 60 Hz (auto sensing) |
| Output Voltage | 220 / 230 / 240 VAC ±10% |
| Voltage Regulation | 2 steps up and 1 step down |
| Waveform (Battery Mode) | Simulated sine wave |
| Transfer Time | 2 ~ 6 ms (typical) |
| Battery | Sealed maintenance-free lead-acid, 12V 7Ah x1 |
| Recharge Time | Under 5 hours to 90% capacity |
| Surge Protection | 175 J, with EMI filtering |
| Protection | Overload, discharge and overcharge protection |
| Net Weight | 4.3 kg (9.5 lb) |



