Product Overview
Brand-built desktops - Lenovo IdeaCentre and ThinkCentre machines in particular, and a number of slim Dell and HP cases - do not give you a normal bundle of SATA power leads from the power supply. Instead the motherboard carries a small 4-pin header and one short cable runs from it to the drive. Add a second drive and there is nowhere to plug it in. This cable is the replacement for that one: it takes the same mini 4-pin header and splits it into two 15-pin SATA power plugs.
It is 45 cm end to end, with 19 cm of slack between the two SATA plugs, which is enough to reach from the board to two bays in a small case. Both drive ends are right-angled so they sit flat along the side of the drive rather than standing proud, which matters in a case where the panel clears the drive by a few millimetres. The conductors are 18 AWG tinned copper in a flat ribbon that routes behind the tray without bulking up.
Before ordering - important: the 4-pin end is a mini 4-pin motherboard header, not the standard 4-pin Molex from a power supply and not the 4-pin CPU power connector. The two are different sizes and will not fit each other. Open the case and look at the small white-lettered SATA power header on the board, or at the plug on the cable you are replacing, before you order. If your PC has an ordinary power supply with Molex or SATA leads coming out of it, you want a normal SATA splitter instead - we stock those too.
Technical Specifications
| Type | Internal SATA power splitter cable |
| Input connector | Mini 4-pin motherboard power header |
| Output connectors | 2 x SATA 15-pin power, right-angled |
| Total length | 45 cm (17.7 in) |
| Spacing between SATA plugs | 19 cm (7.5 in) |
| Conductor | 18 AWG tinned copper, flat ribbon |
| Rated voltage | 12 V |
| Powers | HDD, SSD, Blu-ray and DVD drives |
| Use | Internal, inside the computer case |
| Colour | Black |