Product Overview
An NVMe drive does its best work in short bursts. Push it through a long file copy, a game install or a video export and the controller heats up fast, and once it passes its thermal limit the drive protects itself by slowing down - the write speed you paid for drops to a fraction of it until things cool off. A heatsink does not make the drive faster; it keeps it from getting slower.
This one is a fin-type aluminium block, 70 x 22 mm, sized to sit over the length of a 2280 drive without fouling the retaining screw. A 2.0 W/mK silicone pad bridges the gap between the SSD and the metal, and two silicone elastic bands hold the whole thing together - no screws, no adhesive, and nothing permanent done to the drive. Two cleaning wipes come in the kit so the SSD surface is clean before the pad goes on. The fins are shallow enough to clear most desktop motherboard layouts.
Before ordering: check the clearance above your M.2 slot first - a graphics card, a CPU cooler or the motherboard's own M.2 shield sitting directly over the slot can leave no room for a heatsink. This fits the 2280 length only (80 mm); it will not suit 2230, 2242 or 2260 drives. The SSD itself is not included.
Technical Specifications
| Type | Passive heatsink for M.2 NVMe SSD |
| Compatible form factor | M.2 2280 (80 mm), single-sided and double-sided |
| Heatsink material | Aluminium, fin type |
| Heatsink size | 70 x 22 mm |
| Finish | Black anodised |
| Thermal interface | Silicone thermal pad, 2.0 W/mK |
| Mounting | Two silicone elastic bands, tool-free |
| In the kit | Heatsink, thermal silicone pad, 2 elastic bands, 2 cleaning wipes |
| Intended use | Desktop PC and workstation |
| SSD included | No |