Skip to Content

AC Adapter for DELL 19.5V, 4.62A 90W (7.4 - 5.0mm)

A replacement 90W AC adapter for Dell laptops that charge through the large 7.4 x 5.0 mm centre-pin barrel connector. It supplies a regulated 19.5V 4.62A output, enough to run the laptop and charge its battery at the same time.

  • Output: 19.5V, 4.62A (90W)
  • DC connector: 7.4 x 5.0 mm barrel with centre pin
  • AC inlet: 3-pin cloverleaf (IEC C6) socket on the brick
  • Compatible replacement unit, not a Dell-branded adapter
  • Also suitable for 65W Dell models that use the same 7.4 x 5.0 mm tip
  • Black, standard brick housing with attached DC cable
Price
225.00 LE 225.00 LE

Product Overview

This is a compatible replacement power adapter for Dell notebooks built around the 19.5V 4.62A (90W) standard. It uses the large Dell barrel plug measuring 7.4 x 5.0 mm with a centre pin, the connector fitted to many Latitude, Inspiron, Vostro, Precision and Studio machines of that generation. The adapter is a general-purpose replacement unit and does not carry Dell branding.

The brick has a 3-pin cloverleaf (IEC C6) inlet, so it works with the standard detachable cloverleaf mains lead used by most laptop power supplies. Because 90W is the higher of the two common Dell ratings, the same adapter also runs laptops that originally shipped with a 65W unit, as long as the voltage and the tip size are the same. Keep it as a spare at the desk and leave the original adapter in the bag.

Before ordering: check the label on your current adapter or the port on your laptop. The output must read 19.5V and the barrel must be the large 7.4 x 5.0 mm centre-pin type. It will not fit Dell models that use the slim 4.5 x 3.0 mm tip or USB-C charging.

Technical Specifications

TypeReplacement laptop AC adapter (not Dell branded)
Output voltage19.5V DC
Output current4.62A
Power90W
DC connector7.4 x 5.0 mm barrel, centre pin
AC inlet3-pin cloverleaf (IEC C6)
Intended forDell laptops rated 19.5V 4.62A (90W) or 19.5V 3.34A (65W) with the 7.4 x 5.0 mm tip
ColourBlack