Product Overview
This is the kit that carpenters and shopfitters reach for when a joint has to hold immediately. On its own, cyanoacrylate glue takes a while to cure and needs clamping; paired with an accelerator spray it goes off almost on contact. The method is simple - a light mist of activator on one face, a thin bead of adhesive on the other, press for a few seconds and the bond is made. It is the standard way of assembling MDF mitres, skirting returns, beading, decorative trim and small repairs where a clamp will not fit.
The bottle holds 100 ml of adhesive with a fine nozzle for controlled application, and the 400 ml aerosol gives plenty of activator for the amount of glue supplied. Beyond woodwork, the same pair bonds plastics, rubber, leather, ceramic, stone and metal, which makes the kit useful for furniture assembly, upholstery, shoe repair, model making and general workshop fixing.
Before use: cyanoacrylate bonds skin in seconds, so wear gloves and keep the bottle away from children. The activator is a pressurised aerosol - use it in a ventilated space, keep it away from flames and do not leave it in a hot car or in direct sun. Surfaces must be clean, dry and free of dust or oil for the bond to reach full strength, and the joint should be test-fitted first because there is no time to reposition once the two parts meet.
Technical Specifications
| Brand | Final |
| Type | Two-part kit: cyanoacrylate adhesive + aerosol activator |
| Adhesive volume | 100 ml |
| Activator volume | 400 ml aerosol |
| Setting time | About 5 seconds (as stated on the pack) |
| Main use | MDF and wood joints, skirting, beading, trim |
| Also bonds | Plastic, leather, rubber, ceramic, metal, stone |
| Applicator | Fine nozzle bottle + spray can |