Skip to Content

Rechargeable 406090 LiPo Battery 3.7V 4000mAh - High Capacity Lithium Polymer Cell for DIY Electronics and Portable Devices

406090 rechargeable 3.7V 4000mAh lithium polymer (LiPo) battery with built-in protection board and red/black leads – a slim high-capacity cell for DIY electronics and portable devices.

  • 3.7V nominal, 4000mAh
  • Size 406090 (~4 × 60 × 90 mm)
  • Built-in protection circuit
  • Red (+) / black (−) wire leads
  • Slim, lightweight LiPo cell
Price
150.00 LE 150.00 LE

Product Overview

This 406090 lithium polymer battery delivers 3.7V and 4000mAh in a slim, flat pouch about 4 mm thick, 60 mm wide and 90 mm long. It is a popular replacement and DIY cell for power banks, tablets, GPS units, Bluetooth speakers, LED lights, handheld devices and Arduino / ESP32 projects.

A built-in protection circuit (PCM) guards against over-charging, over-discharging and short circuits, and the cell comes with red (+) and black (−) wire leads ready to solder or fit with your own connector.

Safety: charge only with a proper single-cell 4.2V Li-ion/LiPo charger, never puncture, bend or overheat the pouch, and check the size and polarity before installing.

Technical Specifications

AttributeValue
Model / Size406090 (approx. 4.0 × 60 × 90 mm)
TypeRechargeable Lithium Polymer (LiPo) cell
Nominal Voltage3.7V
Full Charge Voltage4.2V
Capacity4000mAh
Energyapprox. 14.8Wh
ProtectionBuilt-in protection circuit (PCM) against over-charge, over-discharge and short circuit
LeadsRed (+) and black (−) wires, no connector
UsePower banks, tablets, GPS units, Bluetooth speakers, LED lights and DIY electronics