Product Overview
A multi-viewer is not a splitter in reverse — it genuinely composites four separate HDMI feeds into one picture. Plug in four cameras, a PC, a console and a set-top box, and the unit draws them side by side on a single monitor. Five layouts cover the usual needs: one source full screen, two side by side, four equal quadrants, two large with two small, or one large with three small down the side.
Switching between sources and layouts is seamless, so the screen does not blank or re-handshake while you change view, which matters when you are watching something live. Audio follows the source you select, and the unit passes PCM, Dolby, DTS and DSD. You can drive it from the buttons on the front panel or from the IR remote, and LED indicators on the front show which inputs have signal.
Before ordering: the output is 1080p. This unit composites and switches, it does not upscale — four 1080p sources on one screen means each quadrant is a quarter of a 1080p frame, so it suits monitoring and presentation rather than detail-critical work. Check that your display accepts a 1080p 60Hz input, and note that the unit needs its power adapter to run; it is not bus-powered from HDMI.
Technical Specifications
| Brand | Microware |
| Type | HDMI quad multi-viewer with seamless switcher |
| Inputs / outputs | 4 × HDMI in, 1 × HDMI out |
| Display modes | Full screen, dual view (left & right), quad equal, 2 big + 2 small, 1 big + 3 small |
| Output resolution | Up to 1920 × 1080p 60Hz (also 1080p 30Hz, 720p, 480p) |
| Standards | HDMI 1.3a, HDCP 1.2 |
| Audio formats | PCM, Dolby, DTS, DSD |
| Control | Front-panel buttons and IR remote |
| Cable distance | Input up to 15 m, output up to 20 m (AWG26) |
| Other | Hot plug and play, LED signal and power indicators, DVI compatible through an HDMI-to-DVI adapter |
| Power | External power adapter |