Product Overview
This is a matrix, not a splitter and not a simple switch. Connect up to four HDMI sources — a satellite receiver, a media player, a games console, a laptop — and up to four displays, then route any source to any screen. Screen one can show the match while screen two runs a presentation and screens three and four mirror a third source; change the routing at any moment and the other outputs keep running undisturbed. The unit is marked 4K 60Hz, so a full Ultra HD 3840×2160 signal passes through rather than being cut back to 30 Hz.
Audio can be pulled out of the stream as well: a Toslink optical output feeds an AV receiver or soundbar, and a 3.5 mm stereo jack drives powered speakers or headphones — useful when the displays are monitors or projectors with poor speakers. Routing is done from the buttons on the front panel, each with its own indicator LED, from the supplied infrared remote, or from a PC or control system over the RS232 serial port. A bank of DIP switches on the front sets the EDID mode, which is how you stop a 4K source dropping to the lowest-resolution screen in the chain. The chassis is brushed aluminium and runs from an external 12 V adapter with a rocker switch on the back.
Before ordering: this matrix passes the signal through — it does not scale, so every connected display needs to accept the resolution the source is sending. HDMI cables are not included; for 4K 60Hz over anything more than a short run, use cables rated for 18 Gbps. The optical and 3.5 mm outputs carry audio only, and the 3.5 mm jack is stereo, so surround formats need the optical output.
Technical Specifications
| Type | HDMI matrix switcher, 4 in / 4 out, with audio extraction |
| HDMI inputs | 4 × HDMI Type-A |
| HDMI outputs | 4 × HDMI Type-A, independently routed |
| Maximum resolution | 4K @ 60 Hz (3840×2160), as marked on the unit and packaging |
| Audio outputs | 1 × optical SPDIF (Toslink), 1 × 3.5 mm stereo |
| Control | Front-panel buttons with indicator LEDs, IR remote control, RS232 (DB9) serial port |
| EDID | DIP switch bank on the front panel |
| Power | External DC 12 V adapter, rocker power switch on the rear |
| Housing | Brushed aluminium, silver |
| In the box | 1 × 4×4 HDMI matrix, 1 × 12 V power adapter, 1 × IR remote control, 1 × user manual |
| Typical uses | Meeting rooms, classrooms, shop and showroom screens, bars and cafés, home cinema |