Product Overview
The HF-1502 is a classic top-flow CPU cooler: a circular stack of thin aluminium fins with a 1600 RPM fan sitting directly above it. Air is pushed straight down through the fins and then out sideways across the socket area, which also helps cool the VRM and memory next to the CPU. Rated airflow is 52.3 CFM and the fan runs on a hydraulic bearing, which is quieter and longer-lived than a plain sleeve bearing. The whole assembly measures 112 x 110 x 57 mm, so it stays clear of tall memory modules and fits comfortably in slim and mini-tower cases.
Both mounting systems come in the box. Intel boards use the four push-pins already fitted to the heatsink; AMD boards use the black plastic retention frame and screws that are supplied, which clip onto the stock AMD backplate. The fan ends in a 3-pin motherboard header, so the board controls its speed by varying voltage on boards that support DC fan control.
Before ordering: check your socket carefully. This cooler officially covers Intel LGA775 and LGA1156 and AMD AM2 / 754 / 939 / 940. The LGA1156 push-pin pattern is the same 75 x 75 mm hole spacing used by LGA1155, LGA1150, LGA1151 and LGA1200, so it physically fits those boards as well, but it does not fit Intel LGA1700 or LGA2066, and it does not fit AMD AM4 or AM5, which use a different retention frame. The fan plug is 3-pin, so there is no 4-pin PWM speed control.
Technical Specifications
| Model | HF-1502 |
| Type | Top-flow air CPU cooler |
| Heatsink | Round aluminium radial fin stack |
| Overall size | 112 x 110 x 57 mm |
| Fan speed | 1600 RPM (+/-10%) |
| Airflow | 52.3 CFM |
| Bearing | Hydraulic |
| Fan connector | 3-pin motherboard header, 12 V DC |
| Intel compatibility | LGA775, LGA1156 (push-pin) |
| AMD compatibility | AM2, 754, 939, 940 (retention frame supplied) |
| In the box | Cooler, AMD retention frame, mounting screws |
| Finish | Silver aluminium heatsink, blue fan |