Product Overview
This PCI network card restores wired Ethernet to any desktop PC that still has a free 32-bit PCI slot. It is based on the Realtek RTL8139D, one of the most widely supported Fast Ethernet controllers ever made, which is why the card is recognised out of the box by virtually every operating system without hunting for a driver disc.
The board is a DW8139/8100 Rev 1.0 design carrying a shielded RJ45 jack, a PPT PM44-11BP isolation transformer and a 25MHz crystal. It auto-negotiates between 10Mbps and 100Mbps in full or half duplex, so it works with any switch, router or ADSL modem. A Link/Activity LED on the metal bracket shows connection status at a glance. Typical uses include replacing a burnt-out onboard LAN port, adding a second NIC to a router or firewall build, and keeping legacy or industrial machines on the network.
Before ordering: this is a PCI card, not PCI Express (PCIe). Check that your motherboard has a classic white or beige 32-bit PCI slot, and that your case has a free full-height expansion slot for the standard bracket.
Technical Specifications
| Chipset | Realtek RTL8139D Fast Ethernet controller |
| Board revision | DW8139/8100 Rev 1.0 |
| Bus interface | 32-bit PCI, PCI Revision 2.1 / 2.2 |
| Data rate | 10 / 100 Mbps with auto-negotiation |
| Duplex modes | Full duplex and half duplex |
| Network port | 1x shielded RJ45 (8P8C) |
| Standards | IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, CSMA/CD, TCP/IP |
| Indicators | Link / Activity LED on the bracket |
| Transformer | PPT PM44-11BP isolation module |
| Clock | 25 MHz crystal oscillator |
| Driver support | Detected automatically by most Windows and Linux versions; Realtek RTL8139 drivers are also available through Windows Update |
| Bracket | Standard full-height metal bracket |
| Colour | Green PCB |
| Package contents | 1x PCI Ethernet network card |