Skip to Content

HDMI Matrix 4X4 with Audio, 4K @ 60Hz HDMI Matrix Switch 4x4 with Audio Extractor 4 in 4 Out HDMI 2.0 Matrix Switcher Splitter Selector HDR Support HDCP2.2 EDID

A true 4×4 HDMI matrix: four sources go in, four displays come out, and any output can be set to show any input independently. Built for a meeting room, a shop display wall, a bar or a home cinema where several screens share the same set of sources.

  • 4 × HDMI in → 4 × HDMI out, each output switched independently
  • Marked 4K 60Hz on the chassis — supports Ultra HD 3840×2160
  • Audio extraction: optical SPDIF and 3.5 mm stereo outputs
  • Three ways to control it: front-panel buttons with LEDs, IR remote, or RS232
  • EDID DIP switches on the front panel for matching each source to the displays
  • Silver aluminium case, external 12 V supply — remote, adapter and manual included
Price
3,200.00 LE 3,200.00 LE

Product Overview

This is a matrix, not a splitter and not a simple switch. Connect up to four HDMI sources — a satellite receiver, a media player, a games console, a laptop — and up to four displays, then route any source to any screen. Screen one can show the match while screen two runs a presentation and screens three and four mirror a third source; change the routing at any moment and the other outputs keep running undisturbed. The unit is marked 4K 60Hz, so a full Ultra HD 3840×2160 signal passes through rather than being cut back to 30 Hz.

Audio can be pulled out of the stream as well: a Toslink optical output feeds an AV receiver or soundbar, and a 3.5 mm stereo jack drives powered speakers or headphones — useful when the displays are monitors or projectors with poor speakers. Routing is done from the buttons on the front panel, each with its own indicator LED, from the supplied infrared remote, or from a PC or control system over the RS232 serial port. A bank of DIP switches on the front sets the EDID mode, which is how you stop a 4K source dropping to the lowest-resolution screen in the chain. The chassis is brushed aluminium and runs from an external 12 V adapter with a rocker switch on the back.

Before ordering: this matrix passes the signal through — it does not scale, so every connected display needs to accept the resolution the source is sending. HDMI cables are not included; for 4K 60Hz over anything more than a short run, use cables rated for 18 Gbps. The optical and 3.5 mm outputs carry audio only, and the 3.5 mm jack is stereo, so surround formats need the optical output.

Technical Specifications

TypeHDMI matrix switcher, 4 in / 4 out, with audio extraction
HDMI inputs4 × HDMI Type-A
HDMI outputs4 × HDMI Type-A, independently routed
Maximum resolution4K @ 60 Hz (3840×2160), as marked on the unit and packaging
Audio outputs1 × optical SPDIF (Toslink), 1 × 3.5 mm stereo
ControlFront-panel buttons with indicator LEDs, IR remote control, RS232 (DB9) serial port
EDIDDIP switch bank on the front panel
PowerExternal DC 12 V adapter, rocker power switch on the rear
HousingBrushed aluminium, silver
In the box1 × 4×4 HDMI matrix, 1 × 12 V power adapter, 1 × IR remote control, 1 × user manual
Typical usesMeeting rooms, classrooms, shop and showroom screens, bars and cafés, home cinema