Product Overview
A KVM switch solves a specific problem: two computers, one good monitor, and one keyboard and mouse you actually like. Each machine runs an HDMI cable and a USB-B cable to the back of this box; the monitor plugs into HDMI OUT and the peripherals into the three USB-A ports on the front. Press the button and the picture, the keyboard, the mouse and anything else in those USB ports all move to the other machine at once.
The video path is HDMI 2.0b, which is what allows 4K at a full 60 Hz rather than the 30 Hz that older 1.4 switches are limited to, and it carries HDR and HDCP 2.2 so protected content and games consoles pass through without a blank screen. The unit also handles EDID, so each computer keeps seeing a valid monitor description even while it is the inactive one and windows do not get shuffled around every time you switch. The case is metal and there is nothing to install - both computers see an ordinary USB hub.
Before ordering: each computer needs both an HDMI cable and a USB A-to-B cable, and the USB-B lead is what carries the keyboard and mouse - HDMI alone will not switch them. Check whether those cables are included before you order. One monitor only: this switch has a single HDMI output and will not drive a dual-screen setup. The 4K 60 Hz figure also depends on your cables being rated for HDMI 2.0 bandwidth.
Technical Specifications
| Type | 2-port HDMI + USB KVM switch (2x1) |
| Video standard | HDMI 2.0b |
| Maximum resolution | 4K (3840 x 2160) at 60 Hz, HDR |
| Copy protection | HDCP 2.2 |
| EDID | Supported |
| Computer inputs | 2 x HDMI IN + 2 x USB-B |
| Display output | 1 x HDMI OUT |
| Shared peripheral ports | 3 x USB-A |
| Switching | Front push-button, PC1 / PC2 indicator LEDs |
| Drivers | None required |
| Housing | Metal, black |