Product Overview
Plenty of people have a perfectly good laptop charger with a 7.4 mm barrel plug left over from an older Dell or HP machine, and a newer laptop that charges over USB-C. This small right-angle converter bridges the two: the barrel end of the old charger pushes into the socket on one arm, and the USB-C plug on the other arm goes into the laptop. Because the two connectors sit at ninety degrees to each other, the adapter and cable lie flat along the side of the laptop instead of sticking straight out, which is easier on both the port and the desk.
The housing is moulded plastic with 65W B raised on the side, which identifies this as the 7.4 x 5.0 mm version of the range - the same body is also made in other barrel sizes, so the marking is worth checking against your charger. There is no cable to coil or lose; the whole converter is about the size of a thumb joint and lives in a laptop bag easily.
Before ordering: this is a converter, not a charger - you still need your own DC adapter. That adapter must have a 7.4 x 5.0 mm plug with a centre pin and should be a 19-20 V laptop supply; a 12 V or 15 V supply will not charge a USB-C laptop properly. Use it only with USB-C laptops that accept charging at 20 V. Do not use it with a phone, a tablet, earbuds or any other small USB-C device, and do not use it with a laptop whose own charger is rated above 65 W, because the adapter will not deliver more than that.
Technical Specifications
| Type | Right-angle DC barrel to USB-C power converter |
| Marking on body | 65W B |
| Input connector | 7.4 x 5.0 mm female barrel, 0.6 mm centre pin (Dell / HP type) |
| Output connector | USB-C male |
| Maximum power | 65 W |
| Angle | 90 degrees |
| Intended use | USB-C laptops charging at 20 V |
| Cable | None - solid adapter body |
| Colour | Black |