Product Overview
This is a Waveshare BI24-050400-I switching power supply, a wall-mount adapter that converts AC mains into a stable 5V DC output rated at 4 amps, or 20 watts. The wide 100-240V input range means it runs on Egyptian mains without a voltage converter, and the regulated output keeps the voltage steady as the load changes.
Power reaches the device through a 1.2m lead ending in a DC barrel jack measuring 5.5mm on the outside and 2.1mm on the inside, the size used by Jetson Nano boards, many USB hubs, routers, ADSL modems, CCTV cameras, LED strips and small audio gear. Built-in short-circuit, over-voltage and over-current protection guard the connected device, and the unit carries CE, GS and RCM markings.
The mains side is a UK 3-pin (BS 1363) plug, so in Egypt it is used with a UK-to-EU plug adapter or a UK socket.
Before ordering: check that your device asks for 5V and draws no more than 4A, and that its power socket takes a 5.5mm x 2.1mm barrel plug with the same polarity. A different voltage or a wrong tip size can damage the device.
Technical Specifications
| Model | BI24-050400-I (Waveshare) |
| Type | Switching power supply, AC to DC wall adapter |
| Input | AC 100-240V, 50/60Hz, 0.8A |
| Output | DC 5V, 4A |
| Output power | 20W |
| Mains plug | UK 3-pin (BS 1363) |
| DC connector | Barrel jack, OD 5.5mm / ID 2.1mm |
| Cable length | 1.2m |
| Protection | Short circuit, over voltage, over current |
| Markings | CE, GS, RCM, RoHS |
| Colour | Black |