Product Overview
This 406090 lithium polymer battery delivers 3.7V and 4000mAh in a slim, flat pouch about 4 mm thick, 60 mm wide and 90 mm long. It is a popular replacement and DIY cell for power banks, tablets, GPS units, Bluetooth speakers, LED lights, handheld devices and Arduino / ESP32 projects.
A built-in protection circuit (PCM) guards against over-charging, over-discharging and short circuits, and the cell comes with red (+) and black (−) wire leads ready to solder or fit with your own connector.
Safety: charge only with a proper single-cell 4.2V Li-ion/LiPo charger, never puncture, bend or overheat the pouch, and check the size and polarity before installing.
Technical Specifications
| Attribute | Value |
|---|---|
| Model / Size | 406090 (approx. 4.0 × 60 × 90 mm) |
| Type | Rechargeable Lithium Polymer (LiPo) cell |
| Nominal Voltage | 3.7V |
| Full Charge Voltage | 4.2V |
| Capacity | 4000mAh |
| Energy | approx. 14.8Wh |
| Protection | Built-in protection circuit (PCM) against over-charge, over-discharge and short circuit |
| Leads | Red (+) and black (−) wires, no connector |
| Use | Power banks, tablets, GPS units, Bluetooth speakers, LED lights and DIY electronics |