Skip to Content

AC to DC Power Adapter Supply - 3V 1A Output 5.5x2.5mm Single Jack Tip - Wall Plug Transformer (Black)

A compact AC-to-DC wall adapter that converts mains power to a regulated 3V DC output at up to 1A. It suits low-voltage electronics that need a 3V supply, such as small radios, clocks, toys, LED strips and hobby boards.

  • Output: 3V DC, 1A (3W maximum)
  • Input: AC 100-240V, 50/60Hz - works on Egyptian mains
  • DC connector: 5.5 x 2.5 mm barrel plug, centre positive
  • Two-pin EU wall plug, no extra power cord needed
  • Indoor use only
  • Colour: black
Price
50.00 LE 50.00 LE

Product Overview

This AC to DC power adapter plugs straight into a wall socket and supplies a steady 3V DC output rated at 1 ampere, which is 3 watts in total. It works as a replacement or spare power supply for small electronics that run on 3 volts rather than the more common 5V or 12V, so it should only be used with devices whose label asks for a 3V input.

The adapter accepts a wide input range of 100-240V at 50 or 60Hz, so it runs on Egyptian mains without a converter. The output lead ends in a standard 5.5 x 2.5 mm barrel plug wired centre positive, the tip size used by a wide range of small electronics, LED strips, audio gear and hobby boards. The housing is black plastic with a moulded two-pin EU plug, so no separate mains cable is needed.

Before ordering: check the label on your device and confirm it asks for 3V DC, that its socket is 5.5 x 2.5 mm, and that it expects centre-positive polarity. An adapter with the wrong voltage, the wrong tip size or reversed polarity can damage the device it powers.

Technical Specifications

TypeAC to DC wall plug power adapter (transformer)
InputAC 100-240V, 50/60Hz
Output voltage3V DC
Output current1A (1000mA)
Output power3W maximum
DC connector5.5 x 2.5 mm barrel plug, single jack tip
PolarityCentre positive
Mains plugTwo-pin EU type
ColourBlack
UseIndoor use only