Product Overview
This is a replacement AC/DC power adapter for point-of-sale receipt printers that take 24 volts through a round 3-pin DIN socket. It is the power brick that sits between the wall socket and the printer, and it suits the Epson TM-T88 family, the TM-U220 impact printer and the TM-T81, as well as other POS printers built around the same 24V 3-pin input.
The adapter accepts 100-240V AC, so it works on Egyptian mains without a converter, and it delivers 24V DC at 2.1A, roughly 50 watts. Power comes in through a standard IEC C14 inlet, which means the mains lead is detachable and can be replaced on its own if it is damaged. The output lead ends in a keyed 3-pin DIN plug that seats into the printer socket one way only.
The housing is a plain black desktop brick with vented sides, meant to sit on a shelf or under the counter next to the printer rather than hang from the socket.
Before ordering: check your printer label for a 24V DC input and look at the printer socket, it should be round with three pins, matching the close-up photo. Printers that use a barrel jack, a different pin count or a different voltage will not work with this adapter. If your printer came with a different amperage rating, confirm it before ordering.
Technical Specifications
| Type | AC/DC switching power adapter (desktop brick) |
| Input | AC 100-240V, 50/60Hz |
| Output | 24V DC, 2.1A |
| Output power | Approx. 50W |
| Output connector | Round 3-pin DIN |
| Mains inlet | IEC C14 (detachable power cord) |
| Compatible printers | Epson TM-T88 series, TM-U220, TM-T81 and other 24V 3-pin DIN POS printers |
| Colour | Black |